- 您现在的位置：买卖IC网 > Sheet目录1006 > RNF-100-NO.300-WH-SP (TE Connectivity)HEAT SHRINK TUBING
SPECIFICATION RT-350 ISSUE 17
Page 3
4.3.1
Dimensions and Longitudinal Change
Measure three 6-inch (150 mm) specimens of tubing, as supplied, for length ± 1/32 inch
(± 1 mm) , and inside diameter in accordance with ASTM D 2671. Condition the specimens for 3 minutes in
a 200 ± 5°C (392 ± 9°F) oven, cool to 23 ± 3°C (73 ± 5°F) and then remeasure. Prior to and after
conditioning, the dimensions of the tubing shall be in accordance with Table 1 and the longitudinal change
shall be in accordance with Table 3. Calculate the longitudinal change as follows:
C =
L1 - L0
L0
x 100
Where:
C = Longitudinal Change [Percent]
L0 = Length Before Conditioning [Inches (mm) ]
L1 = Length After Conditioning [Inches (mm) ]
4.3.2
4.4
5.
5.1
5.2
5.3
Tensile Strength and Ultimate Elongation
Determine the tensile strength and ultimate elongation of the tubing in accordance with ASTM D 2671 using
1-inch (25-mm) bench marks, a 1-inch (25-mm) initial jaw separation, and jaw separation speed of 20 ± 2
inches (500 ± 50 mm) per minute.
REJECTION AND RETEST
Failure of any sample of tubing to conform to any one of the requirements of this specification shall be cause
for rejection of the lot represented. Tubing which has been rejected may be replaced or reworked to correct
the defects and resubmitted for acceptance. Before resubmitting, full particulars concerning previous
rejection and action taken to correct the defects shall be furnished to the inspector.
PREPARATION FOR DELIVERY
FORM
The tubing shall be supplied on spools or in lengths of 48 +1, -0 inches (1220 +25.4, -0 mm) unless
otherwise specified.
PACKAGING
Packaging shall be in accordance with good commercial practice.
MARKING
Each container of tubing shall be permanently and legibly marked with the size, quantity, manufacturer's
identification, specification number, and lot number.
If this document is printed it becomes uncontrolled. Check for the latest revision.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
APR38-38-12CB/M
散热片 38x38x12mm Medium
RNV14FAL3M90
RES MF HV .25W 3.9M OHM 1% AXIAL
ROHSLABEL
LABEL-ROHS PB FREE 1.75"SQ 500RL
RP-4800-NO.5-0-STK
HEAT SHRINK TUBING
RP1-H-5V
RELAY RF SPDT 100MA 5V
RP1005S-1R0-F
RES HP 1.0 OHM 1/6W 1% 0402 SMD
RP3SL005
RELAY GEN PURPOSE SPST 16A 5V
RP411110
RELAY GEN PURPOSE SPDT 8A 110V
相关代理商/技术参数
RNF-100-NO.301-CL-SP
制造商:TE Connectivity 功能描述:2-1197035-2,9053854002
RNF-100-NO.301-CL-STK
制造商:TE Connectivity 功能描述:Heat Shrink Tubing ST Polyolefin Clear Thin Stick
RNF-100-NO.302-BK-SP
制造商:TE Connectivity 功能描述:0-1193815-7,5050154002
RNF-100-NO.93-BK-SP-SM
制造商:TE Connectivity 功能描述:505171J001
RNF1052TJB
制造商:NKT Denmark 功能描述:2 CORE H07RNF CABLE
RNF12
制造商:未知厂家 制造商全称:未知厂家 功能描述:General Purpose Metal Film Resistor
RNF12BBC23K2
制造商:SEI Stackpole Electronics Inc 功能描述:METAL FILM,1/2W,23.2K,.1%,50PPM,BULK,HAZMAT - Bulk 制造商:SEI Stackpole Electronics Inc 功能描述:Res Metal Film 23.2K Ohm 0.1% 1/2W ±50ppm/°C Conformal AXL Thru-Hole Bulk
RNF12BBE499R
功能描述:METAL FILM 0.5W 0.1% 499 OHM 制造商:stackpole electronics inc. 系列:RNF 包装:散装 零件状态:有效 电阻（欧姆）:499 容差:±0.1% 功率（W）:0.5W，1/2W 成分:金属薄膜 特性:阻燃涂层，安全 温度系数:±25ppm/°C 工作温度:-55°C ~ 155°C 封装/外壳:轴向 供应商器件封装:轴向 大小/尺寸:0.108" 直径 x 0.344" 长（2.75mm x 8.75mm） 高度:- 端子数:2 标准包装:1,000